3D printing training in a digital VR-based environment

Authors

  • Ioanna Kalamakidou University of Western Macedonia
  • Nikolaos Efkolidis University of Western Macedonia
  • Panagiotis Kyratsis University of Western Macedonia
  • Renata Gudaitiene Kauno kolegija/Higher Education Institution

DOI:

https://doi.org/10.59476/ilpmt2026.v2i2.800

Keywords:

Virtual Reality, 3D Printing, Additive Manufacturing, Training, Im-mersive Technologies

Abstract

Virtual reality (VR) environments have been used for a variety of training purposes both in academia and industry. The present paper examines the key stages of the 3D printing process and explores the use of VR technol-ogy for the development of a digital training environment for both entry-level and advanced participants. Users are led through a digital roadmap with the aim of following a structured training course in 3D printing tech-nology, while guiding messages are occasionally presented through the course. First, a series of educational materials introduces the 3D printing technology along with the appropriate fabrication parameters needed. Next, the evaluation of the 3D printed models, together with the presenta-tion of possible malfunctions, offers advanced knowledge to experienced users on how to identify and avoid common printing pitfalls. In addition, computer aided design (BlenderTM) and slicing (Ultimaker CuraTM) pieces of software are presented to stress the appropriate file formats used in the whole process. Then, users can virtually observe the 3D printing simulation based on the generated G-code and select different layers of the geometry to be presented i.e. infill, support, skin, skirt. Finally, the preparation and execution of the printing process enable users to learn the operation of a specific large-scale fused filament fabrication (FFF) 3D printer. An early evaluation of the trainees’ satisfaction is conducted to assess the effective-ness of the training approach.

References

1. Minaoglou M., Firtikiadis L., Efkolidis N., Gudaitiene R. & Kyratsis P., (2025). Implementing product design methodology tools: a desk lamp case study. Innovations in Publishing, Printing and Multimedia Technologies, 1(2), 22-29.

2. Kourmouki A., Minaoglou P., Anastasiadis A., Gudaitiene R. & Kyratsis P., (2025). 3D CAD and 3D printing-based product design: case study of an armchair. Innovations in Publishing, Printing and Multimedia Technologies, 1(2), 12-21.

3. Nazha, H. (2021). 3D printing in education: An Overview. SSRN, http:// dx.doi.org/10.2139/ssrn.3968190

4. Celorrio-Barragué, L., Calvo-Simón, S., Gaspar, M., Vidal-Cortés, M., & Martín-Ramos, P. (2019). 3D printed models-based lab activities to enhance learning-teaching processes in Structural Engineering courses. In Proceedings of the Seventh International Conference on Technological Ecosystems for Enhancing Multiculturality.

5. Günther, J. (2020). Implementation of a hands-on workshop to teach competencies in 3d printing. Proceedings of the 22nd International Con-ference on Engineering and Product Design Education (E&PDE 2020), VIA Design, VIA University in Herning, Denmark.

6. Korenova, L., Schmid, A., Tejera, M., & Lavicza, Z. (2025). 3D Tech-nologies in Teacher Education: Reflections and Didactic Potential. In European Conference on e-Learning.

7. de la Cruz-Campos, J. C., Campos-Soto, M. N., Rodríguez-Jiménez, C., & Navas-Parejo, M. R. (2022). 3D Printing in Education. Theoretical Perspective and Classroom Experiences. CENTRA Journal of Social Sci-ences, 1(1), 67-80.

8. Sakkas, K., Tsogka, A., Giannakeas, N., Tzimourta, K. D., Tzallas, A. T., & Glavas, E. (2022). Applied Virtual Reality in 3D Geometry. 7th South-East Europe Design Automation, Computer Engineering, Computer Networks and Social Media Conference (SEEDA-CECNSM), IEEE.

9. Singhal, I., Satsangee, G. R., Bhardwaj, L., Sharma, G. S., Chandrakar, A. S., Gupta, H., Malik G., Tyagi B, Sahai A. & Sharma, R. S. (2024). 3D-printing virtual simulation lab. IEEE Transactions on Learning Tech-nologies, 17, 1504-1517.

10. Henstrom, J., De Amicis, R., Sanchez, C. A., & Turkan, Y. (2024). Immersive engineering instruction: Using virtual reality to enhance students’ experience in the classroom. Computers & Graphics, 121, 103944.

11. Pohlmann, M., da Silva, F. P., & Barbieri, G. Development and Assessment of a Learning Object based on Virtual Reality and Augmented Reality for Technical Drawing Teaching. International Journal of Education and Research, 11(6), 97-108.

12. Henstrom, J., De Amicis, R., Sanchez, C., & Demirel, O. (2023). VR Technical Drawing Learning Activity for College Engineering Students: Design, Development and Evaluation. International Conference of the Italian Association of Design Methods and Tools for Industrial Engineering. Cham: Springer Nature Switzerland.

13. Balzerkiewitz, H. P., Stechert, C., & Inkermann, D. (2024). Approach of a virtual reality didactic toolkit–implementation and reflection. Proceedings of the Design Society, 4, 2795-2804.

14. Beveridge, L., Dahal, K., & Gilardi, M. (2023). SwageXR: Designing gamified AR applications for industrial training. In Proc. Eur. Conf. Games-based Learn (Vol. 17, No. 1, pp. 765-773).

15. Sopapradit, S., & Wannapiroon, P. (2022). A STEAM Learning with Digital Fabrication Laboratory on Cloud Computing Model to Enhance Creative Product. International Education Studies, 15(3), 150-157.

16. Marjanovic, U., Tegeltija, S., Medic, N., Lazarevic, M., Tasic, N., & Lalic, B. (2018). Content development for virtual reality training. 9th International Scientific and Expert Conference (TEAM 2018), Novi Sad, Serbia.

17. Huerta, O., Kus, A., Unver, E., Arslan, R., Dawood, M., Kofoglu, M., & Ivanov, V. (2019). A Design-based Approach to Enhancing Technical Drawing Skills in Design and Engineering Education using VR and AR Tools. 10th International Conference on Information Visualization Theory and Applications.

Downloads

Published

2026-11-20

How to Cite

3D printing training in a digital VR-based environment. (2026). Innovations in Publishing, Printing and Multimedia Technologies, 2(2), 16-29. https://doi.org/10.59476/ilpmt2026.v2i2.800