Mathematical modelling of tone-density reproduction in flexographic printing on metallized foil
DOI:
https://doi.org/10.59476/ilpmt2026.v2i2.799Keywords:
flexographic printing, metallized foil, optical density, Murray–Davies equation, Yule–Nielsen model, flexible packagingAbstract
Metallized foil is a strategically important substrate in the flexible pack-aging for food and pharmaceuticals due to its superior barrier properties and mirror-like appearance. However, its non-absorbent, highly specular surface creates significant printing challenges, as its optical behavior differs fundamentally from conventional paper. Despite growing demand for color consistency in premium packaging, systematic studies of the full CMYK tone-density response on metallized foil remain scarce. Existing color management protocols, developed for paper, require significant adaptation for specular surfaces. This study aims to provide a comprehensive experimental and mathematical characterization of CMYK tone-density re-production on metallized BOPP foil under controlled industrial conditions. Low-migration CMYK inks were flexo-printed on metallized BOPP, with 1–100 % tone scales for each channel measured via spectrodensitometer per ISO 5-3 and ISO 12647-6. Three complementary mathematical models were applied to analyze the experimental data: the Bouguer–Beer–Lam-bert law, extended to account for the dual optical path length on specular reflective substrates; the substrate-corrected Murray–Davies equation for optical dot-area estimation and tone value increase (TVI) calculation; and the Yule–Nielsen modified equation with an empirical n-factor fitted inde-pendently for each CMYK channel. Additionally, a Boltzmann sigmoidal regression model was fitted to each complete tone-density curve.
The Dmax hierarchy C > M > Y > K resulted from the dual optical path length enhancement on the specular aluminum background, as defined by the Bouguer–Beer–Lambert model. Calculations using the substrate-cor-rected Murray–Davies equation revealed a significant tone value increase (TVI) of 29–36% in the midtones, which substantially exceeds typical values for paper due to the high reflectance contrast of the foil. The fitted Yule–Nielsen factors (n=1.18–1.35) characterized the effective optical response of the printed ink–foil system, while the Boltzmann sigmoidal regression model described the tone-density curves with high precision (R² = 0.9968–0.9981 across the four CMYK channels).
References
1. Żołek-Tryznowska, Z., Rombel, M., Petriaszwili, G., Dedijer, S., & Kašiković, N. (2020). Influence of some flexographic printing process conditions on the optical density and tonal value increase of overprint-ed plastic films. Coatings, 10(9), 816. https://doi.org/10.3390/coat-ings10090816
2. Liu, J. H., Mao, T. T., Liu, Q. L., & Gao, S. H. (2014). Research on color matching and reproduction on aluminum foil packaging materials. Ap-plied Mechanics and Materials, 469, 273–277. https://doi.org/10.4028/ www.scientific.net/AMM.469.273
3. Kipphan, H. (2001). Handbook of print media: Technologies and produc-tion methods. Springer.
4. Tomerlin, R., Valdec, D., Tomiša, M., & Vusić, D. (2023). The impact of underlying opaque white coating parameters on flexographic print qual-ity. Applied Sciences, 13(15), 8575. https://doi.org/10.3390/app13158575
5. Nowak, M. P., Stępak, B., Pielach, M., Stepanenko, Y., Wojciechowski, T., Bartosewicz, B., Chodorow, U., Jakubaszek, M., Wachulak, P., & Nyga, P. (2024). Laser Control of Specular and Diffuse Reflectance of Thin Aluminum Film-Isolator-Metal Structures for Anti-Counterfeiting and Plasmonic Color Applications. Coatings, 14(10), 1298. https://doi. org/10.3390/coatings14101298
6. X-Rite Incorporated. (2020). X-Rite eXact spectrodensitometer user documentation. https://www.xrite.com/-/media/xrite/files/manuals_and_ userguides/e/exact_user_guide/exact_user_guide_en.pdf
7. International Organization for Standardization. (2009). Photography and graphic technology – Density measurements – Part 3: Spectral conditions (ISO Standard No. 5-3:2009).
8. International Organization for Standardization. (2020). Graphic technol-ogy – Process control for the production of half-tone colour separations, proofs and production prints – Part 6: Flexographic printing (ISO Stand-ard No. 12647-6:2020).
9. Murray, A. (1936). Monochrome reproduction in photoengraving. Jour-nal of the Franklin Institute, 221(6), 721–744.
10. Yule, J. A. C., & Nielsen, W. J. (1951). The penetration of light into paper and its effect on halftone reproductions. TAGA Proceedings, 3, 65–76.
11. Mazauric, S., Hébert, M., & Fournel, T. (2018). Revisited Yule–Nielsen model without fitting of the n parameter. Journal of the Optical Society of America A, 35(2), 244–256. https://doi.org/10.1364/JOSAA.35.000244
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Svitlana Havenko, Marta Labetska, Pavlo Valovyi

This work is licensed under a Creative Commons Attribution 4.0 International License.